Tweak Menu - ECS NM70-I3 User Manual

Tweak Menu

This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have
installed in your system.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset
Tweak
Auto Detect DIMM/PCI Clk
Spread Spectrum
Intel(R) Celeron(R) CPU 1037U @ 1.80GHz
Processor Speed
Memory Frequency
Total Memory
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Enabled)
If you enable spread spetrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Intel(R) Celeron(R) CPU 1037U @ 1.80GHz
This is display-only field and displays the information of the CPU installed in your
computer.
Processor Speed (1800 MHz)
This item shows the CPU speed.
Memory Frequency (1333 MHz)
This item shows the memory frequency.
Total Memory (2048 MB (DDR3))
This item shows the total memory.
Warning:
Over-clocking components can adversely affect the reliability of the system
and introduce errors into your system. Over-clocking can permanently
damage the motherboard by generating excess heat in components that are
run beyond the rated limits.
When end-users encounter failure after attempting over-clocking, please take the
following steps to recover from it.
1. Shut down the computer.
2. Press and hold the "Page Up Key (PgUp)" of the keyboard, and then boot the PC
up.
3. Two seconds after the PC boots up, release the "Page Up Key (PgUp)".
Tweak Boot Security Exit
[Enabled]
[Enabled]
1800 MHz
1333 MHz
2048 MB (DDR3)
NM70-I3 USER MANUAL
Auto Detect DIMM/PCI Clock
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
57