1. Manuals
  2. Brands
  3. Eyemax Manuals
  4. Security Camera
  5. PTZ-7H300
  6. User manual

Eyemax PTZ-7H300 User Manual

Ir&intelligent speed dome
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IR&intelligent speed dome

User manual

※ You must read the manual carefully before using,please take care of it,so you can consult as you need.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PTZ-7H300 and is the answer not in the manual?

Questions and answers

Related Manuals for Eyemax PTZ-7H300

Summary of Contents for Eyemax PTZ-7H300

  • Page 1: User Manual

    IR&intelligent speed dome User manual ※ You must read the manual carefully before using,please take care of it,so you can consult as you need.

  • Page 2: Table Of Contents

    Catalogue chapter 1 foreword ............................ 3 chapter 2 product summarize ........................ 3 2．1 product profile ..........................3 2．2 capability feature ..........................4 2．3 function description ........................4 2．4 technical parameters ........................6 chapter 3 installation ............................7 3.1 dome camera DIP switch setting ........................7 3.1.1 enter to DIP switch setting ........................

  • Page 3: Chapter 1 Foreword

    Chapter 1 foreword At the start of the installation and use of infrared intelligent high-speed dome (hereinafter referred to as "dome" ) before, please read the following information: 1. Before installation, please read carefully the product manuals and installation guide. 2.

  • Page 4: 2．2 Capability Feature

    High reliability, long and stable operation, maintenance unnecessary. Infrared intelligent high-speed ball combines various control protocol, can support a variety of popular system platform. With other system matching, each system connection and method of use not identical, here do not specify, please contact the relevant system manufacturer or dealer contact to get necessary information.
  • Page 5 to realize the longitudinal 180 ° throughoutthe continuous monitoring. 5. Setting and call preset position Presets feature is the ball under the current state of functions of the horizontal Angle, yuntai Angle and camera position such as parameters storage focal length into memory, when need can rapidly and will call these parameters to adjust the yuntai and camera position.

  • Page 6: 2．4 Technical Parameters

    action, alarm linkage, etc to invoke the store scan route. 13. Scanned continuously Only an external command or through action, free action on electricity, alarm linkage, etc to call, can make the ball with a certain speed machine horizontal continuous cycle scan. 14.

  • Page 7: Chapter 3 Installation

    Temperature built-in control Intelligent IR lamps 100m, auto-switch the IR distance according to the focus of camera or force to turn on/off the IR lamps through software. Power supply AC24V/4A Material Aluminum shell，waterproof IP66 Work environment -20℃ ~+50℃ (select temperature control accessories), <95%RH chapter 3 installation 3.1 dome camera DIP switch setting...
  • Page 8 Save 2400 Baud rate 4800 9600 （BPS） 19200 2. SW2 Switch sets the ball machine address coding. Address set by binary mode, total can set 256 different address coding, see ball machine address coding sheets. Factory default Settings as shown in figure 2.
  • Page 9 - 9 -...

  • Page 10: Installation Of Ir&Intelligent Speed Dome

    3.2 installation of IR&intelligent speed dome 3.2.1the sizes of dome and bracket Product diagram 3-1 picture 3-1 The demension of bracket 3-2 picture 3-2 - 10 -...

  • Page 11: The Installation Of Dome And Bracket

    3.2.2 the installation of dome and bracket Step 1：the installation of bracket picture 3-3 picture 3-4 Determine the screw holes position drilling In the position picture 3-5 drilled the holes picture3-6 Tighten the screw In stay on the wall of ball machine installation, according to determine the installation position stent screw holes position with signal pen on wall draw hole position as shown in FIG.
  • Page 12 Ball machine after electrify, camera first horizontal and vertical direction automatically after the sports, in lens to pull recently, and down after the farthest stop. Through self-check determine ball machine running normally. Control the camera up, down, left and right rotation: When choosing a camera, can pass the keyboard rocker manual control ball machine up, down, left and right movement.
  • Page 13 Set left/ right scan 1 -start SET 51 PRESETS Set left/ right scan 1 -end SET 52 PRESETS Call left/ right scan 1 CALL 51 PRESETS Call left/ right scan 2 CALL 52 PRESETS System restart CALL 93 PRESETS Recover the factory parameters CALL 94 PRESETS Started four combinations Tour function （Tour preset CALL 59 PRESETS...

  • Page 14: Chapter 5 Menu Setting

    monitor screen self-checking admiral are shown in the following information: VERSION：V10.04 PROTOCOL：PELCO-P/D BAUD RATE：2400 CAMERA ID：1 HORIZONTAL CHECK OK VERTICAL CHECK OK CAMERA CHECK OK These messages will always show the dome camera till self-checking finished. Due to the different monitoring system for the dome camera is not identical operation method, the specific operation please contact with dealers.The following simple introduction to use keyboard control operation of OSD menu.

  • Page 15: Main Menu

    5.1 Main menu Speed dome work normally,set No.64/95 preset,enter main menu,screen display is as picture 3.1. MAIN MENU CAMERA SETTINGS--- > DOME SETTINGS ---> FUNCTION SETTINGS--- > SYSTEM SETTINGS ---> SPECIAL FUNCTION--- > EXIT picture 3.1 MAIN MENU Main menu contents description： <...

  • Page 16: Dome Settings>（Dome Setting

    CAMERA SETUP LANGUAGE ENGLISH ZOOMDISP SHUTTER AUTO FOCUS AUTO BRIGHT COLORSEL AUTO MIRROR LENINIT ---- DEFAULT ---- picture 3.2 CAMERA SETUP CAMERA SETUP （ zoom parameters setting ） is used to check camera basic information,function as follow. LANGUAGE：ENGLISH/CHINESE ZOOMDISP：ON/OFF AGC：200（160---240/AUTO) BLC：ON/OFF SHUTTER ：AUTO---（1/50,1/120,1/250,1/500,1/1000,1/2000--1/10000）...

  • Page 17: 5．4 < Function Settings >（Function Setting

    DOME SETTINGS AUTO INVERT IDLE TIME/MIN IDLE ACTIVE ACTIVE No. REBOO TRUN RUN No. RETURN picture 3.3 DOME SETTINGS On the picture 3.3 DOME SETTINGS , function as below; DOME SETTINGS AUTO INVERT ON/OFF IDLE TIME/MIN :0~255, closed:0 IDLE ACTIVE NO/PRESET/SCAN/PATTERN/TOUR ACTIVE No.

  • Page 18: 1(Presets Setting)

    FUNCTION SETTINGS PRESET SETUP ---> TOUR SETUP---> SCAN SETUP---> PATTERN SETUP---> RETURN 5.4.1<PRESET SETUP> Presets setting, the specific operation is as follows: On the picture <3.4< FUNCTION SETTINGS >， Up / down shake the joystick or pressZOOM+/ZOOM-， so that the cursor is pointing to<PRESET SETUP>；press FOCUS+，enter as below：...

  • Page 19: 3(Scanning Setting)

    TOUR SPEED：0~63 level TOUR SET： TOUR RUN： TOUR DEL： RETURN: TOUR setting is used to set lens auto execute preset track for scanning.the step as below; 1．On the picture <3.4.2< TOUR SETTINGS > ，Up / down shake the joystick or press ZOOM+/ZOOM-，so that the cursor is pointing to <STAY DELAY （S）0～255S]，press FOCUS+/FOCUS-，...

  • Page 20: 4(Patrol Track Setting)

    <left/right scan setting> is used to set left/right scan route,operated as below; 1．Choose left/right scanning number； 2．On the picture 3.4.3 <left/right scan menu>，up/down to shake the joystick and press ZOOM+/ZOOM-，make the cursor point to<START POSTION>； 3． Press FOCUS+， enter scan start, shake the joystick to determine left/right scanning end position，...

  • Page 21: System Settings（System Setting）Menu

    cursor point at <PATTERN NO.>； 2．up/down to shake the joystick, pressZOOM+/ZOOM-，make the cursor point at < RECORD NEW PATTERN >FOCUS+；enter rocord pattern scanning 3． up/down to shake the joystick or press ZOOM+/ZOOM-， record pattern scanning route; 4． up/down to shake the joystick or pressZOOM+/ZOOM-， up/down to shake the joystick or press <...

  • Page 22: Clearance Settings (Eliminate Setting)

    Picture 3.6.1 DISPLAY SETTINGS <DISPLAY SETTINGS> menu is used to set display setting,function description as below; DOME TITLE：ON/OFF DOME ID TITLE：ON/OFF DYNAMIC TITLE：ON/OFF PTZ TITLE：ON/OFF RETURN： 5.6 CLEARANCE SETTINGS: On the picture 3.6 SYSTEM SETTINGS，up/down to shake the joystick,make the point at <...

  • Page 23: Simple Fault Clearing Form

    IR SYSTEM SETUP： （Suspense is no such menu settings） MOTION DETEC： ，ON/OFF。 WDR LEVEL： ，OF/OFF。 RETURN： 5.7.1 IR SYSTEM SETUP: On the picture 3.7 <IR SYSTEM SETUP> MENU，up/down shake the joystick, make the cursor point at < IR SYSTEN SETUP>，press FOCUS+，enter3.7.1 SPECIAL_FUNC MENU as below;...

  • Page 24: Chapter 6 Simple Fault Clearing Form And Maintain

    chapter 6 Simple fault clearing form and maintain 6.1 Simple fault clearing and maintain fault phenomenon Possible causes solutions connect the wrong power correct cable Power supply is damaged Replacement Electricity without action, no image Protective tube Replacement damaged Power cable connect not Eliminate good the IR high speed dome...

  • Page 25: After Service

    Use must abide by various electrical safety standard, the ball machine or signal transmission lines should be with high pressure equipment or cable keep enough distance (at least 50 meters), when necessary even prepare necessary by lightning, surge protection. Cleaning and 6. Cleaning the camera casings, please use dry soft cloth to wipe, if bilge serious when, please use neutral detergent wiped gently.
  • Page 26 2. Resulted of improper use or other reasons as well as the failure of products outside the warranty period can be so doing card repair, free of maintenance, only charge the component costs. 3. Product required maintenance should be a copy of this card and the invoice with the product delivery of the Company or the local special maintenance department.
  • Page 27 Certification of product - 27 -...
  • Page 28 - 28 -...

This manual is also suitable for:

8h330

Table of Contents