Using Bluetooth (Optional); Adding A Bluetooth Device - BenQ Joybook R53 Series User Manual

Using Bluetooth (Optional)

The Bluetooth function allows you to get connected to various devices and ser-
vices that support Bluetooth transmission. You can get rid of those annoying
cables when printing documents, synchronizing your PIM data with your PDA or
another PC, mobile phone or even sharing a network connection.
Bluetooth is optional depending on your purchased model. The Bluetooth icon will
appear on the system tray when Bluetooth is turned on or in connection; the icon
will disappear when Bluetooth is turned off.

Adding a Bluetooth Device

1. Slide the Wireless Connection Switch on the Joybook to the ON
2. Press the <Fn> + <F12> hotkey combination several times until Bluetooth is
"ON".
3. Turn on the power of your Bluetooth device and activate its Bluetooth function.
• For details about how to activate the device's Bluetooth function, please refer to
its documentations.
• The maximum effective range of connection between your Joybook and the Blue-
tooth device is 10 meters.
• You can use your Joybook to connect to up to 7 Bluetooth devices simultaneously.
16 Using the QMedia Bar
4. Click on the Bluetooth icon
lower-right-hand corner of the Desktop to bring up the pop-up box. Click to
select "Add a Bluetooth Device".
position.
If you do not see the Bluetooth icon on the Windows system tray, press <Fn> +
<F12> again and repeatedly until Bluetooth is "ON".
5. Check the "My device is set up and ready to be found" checkbox and click Next.
on the Windows system tray located at the