Appendix D: Specifications - Linksys WAP2000 User Manual

Appendix D
Appendix D:
Specifications
Specifications
Model WAP2000
Standards IEEE802.11g, IEEE802.11b,
IEEE802.3, IEEE802.3u,
IEEE802.3af (Power over
Ethernet), 802.1p
(QoS priority), 802.1Q (VLAN),
802.1X
(Security Authentication),
802.11i - Ready
(Security WPA2), 802.11e
- Ready (Wireless QoS),
802.11F (Wireless Roaming)
Ports 10BASE-T/100 BASE-TX
Ethernet, 12 VDC Power
Buttons Reset
Cabling Type UTP CAT 5
LEDs Power, PoE, Wireless, Ethernet
Operating System Linux
Setup/Config
WebUI Built in Web UI for Easy
browser-based configuration
(HTTP/HTTPS)
Management
SNMP Version SNMP Version 1, 2c, 3
Event Logging E-mail Notification
Remote Syslog
Web F/W Upgrade Firmware Upgradable
Through Web-Browser
Diags: Flash, etc. Flash, RAM, LAN, WLAN
DHCP DHCP Client
Operating Modes
Access Point Access Point Mode,
point-to-point Bridge Mode,
point-to-multipoint Bridge
Mode, Repeater Mode
Wireless
Spec/Modulation Radio and Modulation Type:
802.11b/DSSS, 11g/OFDM
Channels Operating Channels:
11 North America,
13 Most of Europe
(ETSI and Japan)
Wireless-G Access Point with Power Over Ethernet
# of Internal Ant. None
# of External Ant. 2 (Omnidirectional) 3 dBi SMA
detachable
Transmit Power Transmit Power (Adjustable) @
Normal Temp Range:
11b - 18 dBm; 11g - 16 dBm
Antenna Gain 3 dBi
Receiver Sensitivity 11.g: 54Mbps@ -72dBm,
11.b: 11Mbps@ -85dBM
Security
WEP/WPA/WPA2 WEP 64bit/128 bit, WPA-PSK,
WPA2-PSK, WPA-ENT,
WPA2-ENT
Access Control Wireless Connection Control:
MAC-Based
SSID Broadcast SSID Broadcast Enable/Disable
802.1X IEEE 802.1X support
Wireless Client Isolation Wireless Client devices can
be isolated from each other
either within an SSID or
between two SSIDs
Quality of Service
QoS 4 Queues
WMM Wireless priority
General
Wireless roaming based on
IAPP
Load Balancing
Auto-channel selection
Environmental
Dimensions 8.66" x 6.69" x 1.50"
(220 x 170 x 38 mm)
Weight 1.69 lb (0.765 kg)
Power 12V 1A DC input
and IEEE802.3af Compliant PoE
Max Power Draw: 3.48W
Certification FCC, ICES-003, CE
Operating Temp. 14 to 131ºF (-10 to 55ºC)
Storage Temp. -22 to 158ºF (-30 to 70ºC)
Operating Humidity 10 to 90%, Noncondensing
Storage Humidity 5 to 95%, Noncondensing
Specifications
8