Linksys WAP2000 User Manual page 15

Chapter 5
RADIUS Server IP Address
address.
RADIUS Server Port Enter the port number used by the
RADIUS server. The default is 8.
Encryption WPA2 always uses AES for data encryption.
Shared Secret Enter the Shared Secret key used by the
Access Point and RADIUS server.
Key Renewal Timeout Enter a Key Renewal Timeout
period, which instructs the Access Point how often it
should change the encryption keys. The default is 600
seconds.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
WPA2-Enterprise Mixed
This security mode supports the transition from WPA-
Enterprise to WPA2-Enterprise. You can have client devices
that use either WPA-Enterprise or WPA2-Enterprise. The
Access Point will automatically choose the encryption
algorithm used by each client device.
Wireless > Wireless Security > WPA2-Enterprise Mixed
RADIUS Server IP Address
address.
RADIUS Server Port Enter the port number used by the
RADIUS server. The default is 1812.
Encryption Mixed Mode automatically chooses TKIP or
AES for data encryption.
Shared Secret Enter the Shared Secret key used by the
Access Point and RADIUS server.
Key Renewal Timeout Enter a Key Renewal Timeout
period, which instructs the Access Point how often it
should change the encryption keys. The default is 3600
seconds.
Wireless-G Access Point with Power Over Ethernet
Enter the RADIUS server's IP
Enter the RADIUS server's IP
Advanced Configuration
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
RADIUS
This security mode is also known as Dynamic WEP with IEEE
802.1X. A RADIUS server is used for client authentication
and WEP is used for data encryption. The WEP key is
automatically generated by the RADIUS server. Manual
WEP key is no longer supported to ensure compatibility
with Microsoft's Windows implementation.
Wireless > Wireless Security > RADIUS
RADIUS Server IP Address
address.
RADIUS Server Port Enter the port number used by the
RADIUS server. The default is 1812.
Shared Secret Enter the Shared Secret key used by the
Access Point and RADIUS server.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
Disable
There are no options to be configured for this mode.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
Enter the RADIUS server's IP