Linksys WAP2000 User Manual page 14

Chapter 5
should change the encryption keys. The default is 600
seconds.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
WPA2-Personal Mixed
This security mode supports the transition from WPA-
Personal to WPA2-Personal. You can have client devices
that use either WPA-Personal or WPA2-Personal. The
Access Point will automatically choose the encryption
algorithm used by each client device.
Wireless > Wireless Security > WPA2=Personal Mixed
Encryption
Mixed Mode automatically chooses TKIP or
AES for data encryption.
Shared Secret Enter a WPA Shared Key of 8-63
characters.
Key Renewal Timeout Enter a Key Renewal Timeout
period, which instructs the Access Point how often it
should change the encryption keys. The default is 600
seconds.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
WPA-Enterprise
This option features WPA used in coordination with a
RADIUS server for client authentication. (This should only
be used when a RADIUS server is connected to the Access
Point.)
Wireless-G Access Point with Power Over Ethernet
Advanced Configuration
Wireless > Wireless Security > WPA-Enterprise
RADIUS Server IP Address
address.
RADIUS Server Port Enter the port number used by the
RADIUS server. The default is 8.
Encryption
WPA offers you two encryption methods, TKIP
and AES for data encryption. Select the type of algorithm
you want to use, TKIP or AES. The default is TKIP.
Shared Secret Enter the Shared Secret key used by the
Access Point and RADIUS server.
Key Renewal Timeout Enter a Key Renewal Timeout
period, which instructs the Access Point how often it
should change the encryption keys. The default is 600
seconds.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
WPA2-Enterprise
This option features WPA2 used in coordination with a
RADIUS server for client authentication. (This should only
be used when a RADIUS server is connected to the Access
Point.)
Wireless > Wireless Security > WPA2-Enterprise
Enter the RADIUS server's IP
0