Chapter 3: Setting Up The Pda; Overview; Setup Wizard; Figure 3-1: Pda To Pc Installation - Linksys WCF54G User Manual

Wireless-G CompactFlash Card

Chapter 3: Setting Up the PDA

Overview

This Setup Wizard will take you through all the steps necessary to install the Card's software on your PC so it can
communicate with the PDA.
Connect your PDA to your PC. Make sure you have the Microsoft ActiveSync software installed on your PC. Refer
to your PDA's documentation for information on Microsoft ActiveSync software.
IMPORTANT: Do not insert the Card before installing the Setup Wizard or
the setup will not work.

Setup Wizard

1. Insert the Setup Wizard CD into your PC's CD-ROM drive.
2. The Setup Wizard's Welcome screen should appear automatically on your monitor. If this screen does not
appear automatically, you can access it by clicking the Start button and choosing Run. In the drop-down box,
type d:\setup.exe (if "d" is the letter of your CD-ROM drive) and click OK.
Click the Install button to continue this Setup Wizard. Clicking the User Guide button opened this Guide. To
exit this Setup Wizard, click the Exit button.
3. The following screen displays the License Agreement. Read the agreement, then if you agree, click Next to
continue.
Click Cancel if you want to close the Setup Wizard.
Chapter 3: Setting Up the PDA
Overview

Figure 3-1: PDA to PC Installation

Figure 3-2: Welcome

Figure 3-3: License Agreement

5