Table of Contents
Advertisement
Troubleshooting
Unit doesn't respond (no power)
• Check that all connections are correct and properly plugged in.
• Make sure your device is properly paired with the iBT30.
• Make sure the Power is ON, indicated by a solid blue light on the front of the unit.
Unit doesn't respond (frozen or locked up)
• If the unit becomes unresponsive, the software may have frozen or become locked up. Remove the unit
from the charging base. Insert the end of a paper clip or similar into the reset pin hole on the bottom
of the unit.
Trouble pairing device/ computer with iBT30
Bluetooth implementation varies depending on your device's hardware and operating system. Please see
our website for updates on pairing.
• Make sure you have the latest firmware for your device.
• Make sure your device is working properly. Check your device's manual for details on Bluetooth pairing
and linking.
• When you power ON the speaker, it will automatically link with the last previously paired Bluetooth
device if the device is still within range (approx. 30 feet). To pair with a different device you must turn
off Bluetooth capability on the already paired device, or take it out of range.
For further information and to see the latest instructions, visit www.ihomeaudio.com/support
l l
Advertisement
Table of Contents
