Table of Contents
Advertisement
iBT30
C)Biuetooth
QUICK BLUETOOTH CONNECTION GUIDE
BEFORE YOU START
Your Bluetooth device (cellphone, MP3 player, computer, etc.) must support the A2DP Bluetooth profile
(commonly known as stereo audio profile) to work with the iHome iBT30.
Many of the latest mobile phones and PCs with built-in Bluetooth functionality will support this profile. For
accurate information about your product, please refer to your Bluetooth device's user manual for details on the
Bluetooth profiles it supports and on how to set the device's Bluetooth pairing/searching/setup mode.
ABOUT PAIRING
Pairing is the term used when wirelessly connecting two Bluetooth devices for the first time.
This allows the devices to "see" each other and creates a unique lasting connection between the specific devices.
PAIRING & LINKING YOUR BLUETOOTH DEVICE WITH THE iBT30
1) Make sure your Bluetooth device is fully charged. Turn it on.
2) Turn on Bluetooth functionality on your Bluetooth device. Typically, Bluetooth
controls are found on the device's tools or settings menu (see your user
manual). Turn
on
Bluetooth connectivity and make your device
"discoverable".
3) Slide the Power Button on the back of the unit to ON to turn the unit on.
4) Press and hold the Pairing Button on the back of the unit for 2 seconds. The
indicator lights will flash blue indicating pairing attempt. "iHome iBT30" should
appear on your device's menu. If "Not Paired", "Not Connected" or similar
message appears, on your device, select "iHome iBT30" on the device to
connect it. If your device asks for a password, enter 1234 or 0000 on the
keyboard of your device. If no device is paired within 3 minutes, a tone will
sound, the indicator lights will flash red 3 times and the unit will revert to its
previous mode. To retry pairing, press and hold the Pairing Button on the
back of the unit again.
-
....
QQ)~
<!}olll~
~
0
5) Once paired with a device, the blue indicator light will stop flashing then glow steadily. There should be an
indication on your device that pairing is complete. On some devices, you must then select "Use as Audio Device"
or similar on the device's Bluetooth menu. Once paired, your device should link to the iBT30 whenever within
range (about 30 feet).
6) Pairing remains intact when the iBT30 and/or the Bluetooth device is powered off or is taken out of link range
(30 feet). The iBT30 supports auto-linking and will automatically re-establish an active connection when your
Bluetooth device returns within range.
7) The next time the iBT30 is powered on it will automatically try to re-establish a link with the most recently
linked Bluetooth device. If your device does not support auto-linking OR was not the last linked to the iBT30,
you must re-link manually by selecting iBT30 from the Bluetooth device's menu on your Bluetooth device.
8) When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long
as that device is still within range (about 30 feet). To pair with a different device follow steps 3 & 4 above.
2
4
Printed in China
02/04/2013-0
Advertisement
Table of Contents
