User Maintenance Instructions - George Foreman BRAIN STORM TURBO GFSB1 Owner's Manual

User Maintenance Instructions

This Blender requires little maintenance. It contains no user serviceable
parts. Do not try to repair it yourself. Any servicing requiring disassem-
bly must be performed by a qualified appliance repair technician.
CAUTION: Never immerse the Motor Housing, plug or cord in
water or any other liquid.
1. Always unplug the unit before cleaning.
2. Whenever possible, rinse parts immediately after processing to
make cleanup easier.
CAUTION: Use extreme care when handling the Blade
Assembly. Do not touch the Blades with your fingers. The
Blades are very sharp and can cause injury if touched.
3. Wash the Blender Container, Lid, Measuring Cap and Blade
Assembly in warm soapy water. Rinse and dry thoroughly. Never
use rough scouring pads or abrasive cleansers on any plastic or
metal parts as the surface may be damaged. Only the Blender
Container may be washed in the dishwasher.
4. If necessary, wipe exterior surfaces with a moist cloth or sponge
and dry thoroughly.
5. Do not fill the Blender Container with boiling water or place any of
the parts in boiling water.
6. Do not allow the Blade Assembly to soak in water for long periods
of time.
7. Quick clean-ups of the interior of the Blender Container can be
made by using the Pulse function. Plug the Blender into an electri-
cal outlet then pour some warm water and a very small amount of
detergent into the Blender Container. Place the Lid with Measuring
Cap on the Blender Container then press the Pulse button several
times. The unit will clean itself without you having to handle the
sharp Blades. Unplug the Blender, rinse and dry thoroughly, being
careful as the Blades are sharp.
8. Properly reassemble all parts before storing.
STORAGE
CAUTION: Always assemble clean Blender parts correctly
before storing on the Motor Housing. Severe injury can result if
Blender is accidentally turned ON when not properly assem-
bled.
Unplug and clean unit. Store in original box or in a clean, dry place.
Never store Blender while it is hot or plugged in. Never wrap cord
tightly around the appliance. Never place any stress on cord, especial-
ly where the cord enters the unit, as this could cause the cord to fray
and break.
11