Helpful Hints - George Foreman BRAIN STORM TURBO GFSB1 Owner's Manual

• Add ingredients to Blender Container a little at a time to ensure
proper blending and prevent overflow. Never fill Blender
Container with more than 52 ounces of ingredients (6 1/2 cups);
the action of the Blade will cause ingredients to rise in the
Container. Make large recipes in several batches.
• Place liquid ingredients into the Blender first, unless recipe
instructs otherwise. The liquid will speed processing.
• Always secure the Lid on the Blender Container before operat-
ing. Firmly press the spout end of the Lid into position on the
Blender Container then press the opposite end of the Lid into
place. When removing the Lid, be sure to hold the Blender
Container by the Handle before lifting the Lid to avoid tipping
the Container.
• Do not remove Blender Container from the Motor Housing while
the motor is running.
• Thick mixtures require special attention during processing. Turn
Blender off if blending stops or ingredients stick to sides of the
Container. Remove the Lid and, with a rubber spatula, push the
mixture toward the blades. Replace the Lid and continue pro-
cessing.
• Extra ingredients may be added while blending by removing the
Measuring Cap on top of Lid. Add solids and ice a little at a
time through the hole in the Container Lid. Always cut solid
foods, such as vegetables and cheese, into small chunks
before placing in the Blender Container.
• To reduce wear on the Blade Assembly, place solid food por-
tions in Blender 1/2 cup at a time. Raw fruits and vegetables as
well as cooked meats should be cut into 1 inch pieces before
processing.
• Remove thick mixtures easily through bottom of the Blender
Container after removing the Collar and Blade Assembly.
• Do not store food in Blender.
• To prevent excessive heat expansion, always remove Measuring
Cap from Lid when processing hot ingredients. Add hot foods
slowly (to a maximum of 2 cups).

Helpful Hints

10