Table of Contents
Advertisement
Appendix
Client for Microsoft Setup for Windows 98
If you are installing the Compact USB Network Adapter in a Windows 98 PC that
is used in an NT domain, follow the directions below.
1. Start up Windows. Click Start, select Settings and open the Control Panel.
Double-click Network. When the Network window appears, click the
Configuration tab.
2. In the Primary Logon Box, choose Client for Microsoft Networks, which
instructs your PC to log into an NT Domain or Windows 2000 server where
you already have a username and password set up.
3. Highlight Client for Microsoft Networks and click the Properties button.
4. The "Client for Networks Properties" window will appear. Make sure that Log
on to Windows NT domain is checked in the "Logon Validation" box. Enter
the name of your domain into the "Windows NT Domain" field
5. From the Access Control tab, you can set the level of access those on the
network will have to this computer.
6. When you're done, click the OK button. When asked if you want to restart
your PC, choose to do so.
The Microsoft Client portion of the Windows setup is complete.
Starting Over in Windows 98
If you experience installation difficulties, you may need to re-install all of the
Windows networking components from scratch. The instructions below explain
how to give your PC a clean sweep so that you can retry the network adapter's
driver installation.
1. At the desktop click the Start Button, highlight Settings and open the
Control Panel.
2. Double-click the Network Icon.
35
Instant EtherFast
®
Series
EtherFast
®
10/100 Compact USB Network Adapter
3. If the Configuration box has a component called Dial-Up Adapter, skip for-
ward to step 5. If it doesn't, continue with step 4.
4. Remove any instance of the name Linksys in the box. This includes
IPX/SPX...Linksys, NetBEUI...Linksys, and TCP/IP...Linksys. Also remove
Client for Microsoft Networks, Client for NetWare Networks, and File and
Printer Sharing for Microsoft Networks.
36
Advertisement
Table of Contents
