Installing The Network Protocols For Windows 95, 98 And Millennium - Linksys ETHERFAST 10/100 User Manual

IPX/SPX-compatible Protocol
Click the Add button. Choose Protocol and click the Add button. Select
Manufacturer and choose Microsoft. Under the Network Protocol box, high-
light IPX/SPX-compatible protocol. Click OK .The computer will begin copy-
ing files to your system. When the installation is complete, you will be asked
if you want to reboot. Click OK.
NetBEUI
Click the Add button. Select Protocol, then click Add. Under Manufacturer,
highlight Microsoft. Under Network Protocol, highlight NetBEUI. Click OK.
The computer will begin copying files to your system. When the installation is
complete, you will be asked if you want to reboot. Click OK.
TCP/IP
Click the Add button. Select Protocol, then click Add. Under Manufacturer,
highlight Microsoft. Under Network Protocol, highlight TCP/IP. Click OK.
The computer will begin copying files to your system. When the installation is
complete, you will be asked if you want to reboot. Click OK.
Installing the Network Protocols for Windows 95, 98 and
Millennium
1. From the Start
Menu, select
Settings and
bring up the
Control Panel.
From the Control
Panel, double-
click on the
Network icon.
65
Linksys Instant EtherFast Series
®
EtherFast 10/100 LAN Cards
®
2. Select Network PC Card from the list and click the Add button.
Note: Before adding
any network proto-
cols, verify that the
protocol is not already
installed. Never install
duplicate protocols.
3. Highlight Protocol and click
the Add button.
4. Select Microsoft
from the list of
"M anuf acturer s"
and TCP/IP from
the list of "Network
Protocols" and click
the OK button.
66