Manually Installing Network Components In Windows 98 - Linksys USB200HA User Manual

5. Right-click on Linksys Phoneline 10M USB Network Adapter to bring
up a context menu like the one shown below.
6. Choose Disable from the context menu first.
7. When asked if you want to disable the device, click Yes.
8. Right-click on Linksys Phoneline 10M USB Network Adapter again.
This time, select Uninstall.
9. The Network Adapters category should no longer be listed.
10. Click the OK button, restart your computer, and go to page 19 to install
the Windows 2000 driver.
32
Linksys HomeLink™ Series Phoneline 10M USB Network Adapter

Manually Installing Network Components in Windows 98

Sometimes, you may have to manually install missing Windows networking
components. For manually installing network components in Windows 2000,
see your network adminstrator or your Microsoft documentation.
1. Click on Start, Settings, then Control Panel.
2. Double-click the Network icon. The Network window appears.
N N o o t t e e : : You will probably need your Windows CD-ROM
to install network components. If your CD-ROM isn't
available, direct Windows to windows\options\cabs"
when asked for a file location.
3. Click the Configuration tab. Check to see that the following network com-
ponents are installed.
• Client for Microsoft Networks
• Linksys HomeLink 10M USB Network Adapter
• IPX/SPX-compatible protocol
• NetBEUI
• TCP/IP
There may be other components listed in addition to the ones shown above. If
any of the above components are missing, add them as follows.
Client for Microsoft Networks
If you plan on connecting to an NT file server or peer-to-peer network, click
on the Add button. Highlight Client and click on Add. Choose Microsoft as
the manufacturer in the Network Client field. Highlight Client for Microsoft
Networks and click OK. Click OK again. The PC will begin copying the
files it needs. When the installation is complete, you will be asked if you
want to reboot. Click Yes.
Client for NetWare Networks
If you plan to connect to a Novell NetWare server (3.x), click on the Add
button. Highlight Client and click Add. In the Network Client window, select
Manufacturer and choose Microsoft. Highlight Client for Microsoft
Networks. Click OK again. The computer will begin copying files to your
system. When the installation is complete, you will be asked if you want to
reboot. Click Yes.
33