Speaker Setup - Sony DAV-DZ555K Operating Instructions Manual

2)
0.0 - 7.0 m /
0 - 23 ft
Be sure to change the value in the Setup Display
when you move the speakers.
[L/R] Surround speakers distance
1)
3.0 m/10 ft
can be moved up to 5.0 meters
(appears when you
(16 ft) closer to the listening
set [SURROUND] to
position from the front speaker
[YES] in the
distance.
[CONNECTION]
setting.)
1)
When you perform the Quick Setup (page 20), the
default settings are changed.
2)
0.0 to 6.9 meters for North American models.
Note
• If all front and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
• Do not place the surround speakers farther away from
your listening position than the front speakers.
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R] Set this between –6.0 dB and
0.0 dB
0.0 dB.
[CENTER] Set this between –6.0 dB and
0.0 dB
+6.0 dB.
(appears when you
set [CENTER] to
[YES] in the
[CONNECTION]
setting.)
[SUBWOOFER] Set this between –6.0 dB and
0.0 dB
+6.0 dB.
x [LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R]
Set this between –6.0 dB and
0.0 dB
+6.0 dB.
(appears when you
set [SURROUND]
to [YES] in the
[CONNECTION]
setting.)
To adjust the volume of all the
speakers at one time
Turn the VOLUME control on the unit, or press
VOLUME +/– on the remote.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[OFF]
The test tone is not emitted from the
speakers.
[ON] The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
Adjusting the speaker level by
using the test tone
1
Press DISPLAY when the system is
in stop mode.
The Control Menu display appears.
2
Press X/x to select
then press .
The options for [SETUP] appear.
3
Press X/x to select [CUSTOM], then
press .
The Setup Display appears.
4
Press X/x repeatedly to select
[SPEAKER SETUP], then press
c.
[SETUP],
or
continued
85
GB