[Speaker Setup] - Sony DAV-DX150 Operating Instructions Manual

Dvd home theatre system
Hide thumbs Also See for DAV-DX150:
Table of Contents

Advertisement

[SPEAKER
SETUP]
Position diagram
To obtain the best possible
surround sound, set
for the size of the speakers you have connected
and their distance from yottr listening position.
Then use the test tone to acliust the level and the
balance of the speakers to the same level.
Select [SPEAKER
SETUP] in the Setup
Display.
For details, see "Using the Setnp
Display"
(page 71).
The default settings
are nnderlined.
• You cannot operate these setup items when you
connect headphones to the system.
SPEAKER SETUP
SIZE:
To
return
to the
default
setting
when
changing
a setting
Select the item, then press CLEAR. Note that
only the [SIZE] setting does not remm to the
default setting.
• [SIZE]
If you do not connect center or surround
speakers,
or move the snrround speakers, set the
parameters
for [CENTER]
and [SURROL%TD]
and specie- the surround speaker position
and
height. Since the front speaker setting is fixed,
you cannot change them.
[FRONT]
[CENTER]
[SURROUND]
[SUBWOOFER]
[YES]
_:
Normally
select this.
[NONE]:
Select this if no center
speaka
is used.
[BEHIND]:
Select this if smround
speakas
are located
in section Q.
[SIDE]:
Select this if surrotmd
speakas
are located
in section O
[NONE]:
Select this if no
surround
speaker is used.
[YES]
• When you select an item, the solmd cuts off I)r a
nlonlenl.
• Depending on the settings of otha speakers,
subwoofer may be excessive.
• [DISTANCE]
The deihult distance setting lbr the speakers
in
relation to the listening position
is shown below.
When you set the distance using the Quick Setup
(page 26), the settings is automatically
displayed.
76c8

Advertisement

Table of Contents
loading

Table of Contents