Sony DAV-DZ555K Operating Instructions Manual page 11

2
Attach the post cover to the other end of the post.
Orient the slot toward you, attach the post cover so that the slot of the post engages with the tab of
the post cover, then secure with the screw.
Speaker cord
Hole
Upper part of the
post
3
Lay the post in the slot of the speaker, slide the post to the end of the slot, then secure
the post with the mounting plate and screws.
Select the speaker whose color of the jack on the rear panel of speaker matches the color tube of
the speaker cord.
Post cover
Rear of the speaker
When securing the mounting plate, position the mounting plate depending on the desired height of
the speaker.
Low position
After attaching the post to the base, you can adjust the height of the speaker.
Thread the speaker cord through
the hole of the post cover.
,
Post cover
Be careful the
orientation of the
post cover when
placing the post.
,
High position
,
Screw (small, black)
Secure 2 screws (large, with
washer) in criss-cross pattern.
Mounting plate
continued
11
GB