Advertisement
1 Connect
If you do not have an existing music player you may skip steps 3 and 4.
Please refer to the cautionary information sheet included with
1
your ProFusion iS before proceeding.
Adjust the volume on your amplifier down completely. Then turn off
2
your amplifier and old music player. You'll be prompted to increase the
amplifier volume later.
Disconnect the power and remove all cables from the old player.
3
Remove the old music player and its power supply.
4
Place your ProFusion iS in an area with adequate ventilation space.
5
6A
Connect the cables in this order:
6
A:
Color coded RCA audio cables to the corresponding ProFusion iS
audio zones and to your sound system. If your old music player used
RCA plugs to connect to the amplifier, you may be able to reuse them.
B:
Ethernet cable to your ProFusion iS and to your available
Ethernet port.
C:
The external power adaptor to your ProFusion iS.
CAUTION: Certain parts may cause electrical shock and injury.
IMPORTANT: Please note these important operational instructions
and clarifications.
Your existing RCA
connectors may
be another color.
Need Help? Call 800.929.5407 or visit dmx.com/pandora 5
6B
6C
Advertisement
