Troubleshooting - Nikon WT-3 User Manual

Troubleshooting

Problem
"POWER" LED does not
light.
All LEDs blink at once.
Wireless transmitter
option not available.
Excessive radio interfer-
ence.
Camera displays "Ethernet
cable is not connected. "
Camera displays wireless
error.
Camera displays TCP/IP
or FTP error.
Memory card error dis-
played.
64
• Confi rm that battery is inserted in WT-3 and is
fully charged.
• Reattach WT-3.
• Insert memory card (transfer and print modes
only).
• Turn camera on.
• Press shutter-release button halfway to acti-
vate exposure meters.
• Select On for Wireless transmitter > Wireless
LAN system option in camera setup menu.
• Open connection to printer (print mode only).
WT-3 hardware error. Contact a Nikon-autho-
rized service representative.
• Reattach WT-3.
• Select PTP for USB option in camera setup
menu.
Change orientation of camera or antenna.
Connect Ethernet cable or change interface set-
ting to Wireless & Ethernet.
• Confi rm that host and wireless LAN adapter
are on.
• Ensure that there are no obstacles between
WT-3 and wireless LAN adapter.
• Check settings for host and / or wireless LAN
adapter and adjust camera settings appropri-
ately.
• Check settings for host and / or wireless LAN
adapter and adjust camera settings appropri-
ately.
• Check fi rewall settings.
Confi rm that memory card is properly inserted. 30, 42
Solution
28
26
30, 42
—
—
47
44
35, 40,
44
26
15
6
5, 17,
62
—
—
20, 48
20, 48
23, 61