For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them.
Page 3
Follow the instructions of hospital and airline personnel This device emits radio frequency radiation that could interfere with medical or navigational equipment. Do not use this device in a hospital or on board an airplane without first obtaining the permission of hospital or airline staff.
Page 4
• Nikon will not be held liable for any damages resulting from the use of this product. • While every effort has been made to ensure that the information in...
Page 5
Notice for Customers in the U.S.A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 6
FCC/IC RF Exposure Statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
Notice for Customers in Canada IC RSS-Gen Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device.
Notice for Customers in Europe R&TTE Directive We, the manufacturer (Nikon Corporation) hereby declare that this Wireless Transmitter (WT-5) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FR★ ★Outdoor use limited to 10mW eirp within the band 2454-2483.5MHz ❏Notice for Customers in France...
Page 9
Notice for Customers in Korea Contact Nikon Corporation Korean Branch ;Tentative Telephone Website ❏Caution in use of wireless LAN products ❏Information in use of wireless LAN products Notice for Customers in Thailand This telecommunication equipment conforms to NTC technical requirement.
Page 10
Notice for Customers in Brazil ANATEL Website Para consultas, visite: www.anatel.gov.br Tentative Notice for Customers in Taiwan ❏Caution in use of wireless LAN products...
Page 11
Notice for Customers in Mexico ❏Caution in use of wireless LAN products Este equipo opera a titulo secundario, consecuentemente, debe aceptar interferencias perjudiciales incluyendo equipos de la misma clase y puede no causar interferencias a sistemas operando a titulo primario.
Page 12
Notice for Customers in China ❏Caution in use of wireless LAN products <2.4GHz> 第十三条 ■ 使用频率:2.4 - 2.4835 GHz ■ 等效全向辐射功率(EIRP): 天线增益<10dBi 时:≤100 mW 或≤20 dBm ■最大功率谱密度: 天线增益<10dBi 时:≤20 dBm / MHz(EIRP) ■ 载频容限:20 ppm ■ 帯外发射功率(在 2.4-2.4835GHz 頻段以外) ≤-80 dBm / Hz (EIRP) ■...
Page 14
❏In places where people may be close to one another such as crowded trains, turn off the power of the WT-5 or disable the wireless LAN feature. This is because WT-5 may be close to people using medical devices including cardiac pacemakers or rearing aids and have bad influences on the medical devices.
Page 15
Introduction Thank you for your purchase of the WT-5 Wireless Transmitter for compatible Nikon digital cameras.The WT-5 is for use exclusively in the country of sales; operation in other jurisdictions is not guaranteed. Users who are unsure as to the country of purchase are requested to cantact a Nikon-authorized service representative for more information.
Page 16
2. Connector for Camera connection Connect the WT-5 to the camera. 3. Eyelet for strap You can use the strap through the eyelet for strap in the WT-5. 4. Status LED Status LED glows green when the WT-5 is connected to the network by infrastracture mode or adhoc mode and ready.
The WT-5 connects the camera to wireless and Ethernet networks. Photographs on the camera can then be previewed on the computer or transmitted to an ftp server or printer and the camera controlled remotely from a computer. The WT-5 supports the following modes: Mode Host...
Page 18
Workflow Tentative When using the WT-5 for the first time, follow the steps below to set up the WT-5, install the required software, create a wireless network, and upload pictures to the computer. 1 Set up the WT-5 and install software (pp. xx–xx)..
Page 19
(if the camera is equipped with multiple memory card slots, the card can be inserted into any slot). Connect the WT-5 to the Camera and turn the attachment knob to attach to the camera. Turn the camera on.
Need help?
Do you have a question about the WT-5 and is the answer not in the manual?
Questions and answers