Flash Exp. Comp; Noise Reduction Filter - Nikon COOLPIX P51 0 Quick Start Quide

Shooting Menu (j, k, l or m Mode)

Flash Exp. Comp.

Rotate the mode dial to j, k, l or m M d button M j, k, l or m tab (A13)
M Flash exp. comp.
Flash exp. comp. option is used to adjust the flash output. Use this option when the
flash is too bright or too dark.
Option
+0.3 to +2.0
0.0 (default
setting)
-0.3 to -2.0
The icon for the current setting other than 0.0 is displayed on the monitor (A8).

Noise Reduction Filter

Rotate the mode dial to j, k, l or m M d button M j, k, l or m tab (A13)
M Noise reduction filter
Set the strength of the noise reduction function that is normally performed when
recording the picture.
Option
e
High
Normal (default
M
setting)
l
Low
Noise reduction filter setting can be confirmed on the monitor when recording a
picture (A8).
E52
The flash output is increased from +0.3 to +2.0 EV, in increments of 1/3
EV, to make the main subject of the frame appear brighter.
The flash output is not adjusted.
The flash output is reduced from –0.3 to –2.0 EV, in increments of 1/3
EV, to prevent unwanted highlights or reflections.
Perform noise reduction at a level higher than the standard
strength.
Perform noise reduction at the standard strength.
Perform noise reduction at a level lower than the standard
strength.
Description
Description