CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The graphic symbols on the back cover of the set mean the following: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage"...
CAUTION Never tamper with any components inside your set, or any other adjustment controls not mentioned in this manual. All television receivers are high voltage instruments. Your PICTURE TUBE is a highly vacuum. If broken, glass fragments will be violently expelled. Scratching, Chipping or undue pressure is dangerous and should be avoided.
Page 4
This product incorporates copyright protection technology that is protected by U.S. pat- ents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disas- sembly is prohibited.”...
Page 5
IMPORTANT SAFEGUARDS FOR PREFITTED M AINS PLUGS FOR UK ONLY For you convenience a mains plug has been fitted to this appliance. For your safety please observe the following information. 1. Should the fuse in the plug part remove the plug from the wall socket and replace the fuse with a 3 Amp ASTA approved to BS 1362 fuse.
REMOTE CONTROL 13. Subtitle Button Power Button 14. Two or Three Digital program Button 2. Skip ( ) Button 15. Display Button 3. Skip ( ) Button 16. Zoom Button 4. Language Button 17. DVD MENU Button 5. Pause/Stop ( ) Button 18.
REMOTE CONTROL Before using the remote control, batteries must first be installed. HOW TO INSTALL BATTERIES 1. Slide the battery compartment cover out. 2. Install two (2) “AA” batteries (not included) into each remote, paying attention to the polarity diagram in the battery compartment 3.
ONLY FOR PAL- I OPERATING THE TELEVISION Connect your TV aerial to the aerial input socket located on the back of the TV. Push the Main Power Switch, Power Indicator will be illuminated. After few seconds the TV screen will light up and will show interference on the screen. The TV will require tuning into the available TV stations in your area.
Page 11
ONLY FOR PAL- BG OPERATING THE TELEVISION Connect your TV aerial to the aerial input socket located on the back of the TV. Push the Main Power Switch, Power Indicator will be illuminated. After few seconds the TV screen will light up and will show interference on the screen. The TV will require tuning into the available TV stations in your area.
Page 12
C. SYSTEM 1. Press the “ +/-” button to select the C SYSTEM then press “ +/-” button to change the desired colour system PAL,NTSC,AUTO. S SYSTEM 1. If the unit is the single sound system,it is fixed and cannot be adjusted. Notes: 1.
CHANNEL SELECT AND VOLUME CONTROL 1) Press “ +/-” buttons to select TV station. Press “ -”, the programme no. will Press “ +”, the programme no. will change appear on the top right corner and from a lower no. to higher number. change from a higher to lower number.
4. REMOTE CONTROL OPERATION CHANNEL Up and Down buttons Press the “ +/-” button to select a higher or lower channel number. 0~9 Numberic Button To select a TV station using A buttons 0~9. For example: Press number “9” button to select PROGRAMME “9”. Two digit Programme Number For example:selecting PROGRAMME “12”...
OPERATING YOUR DVD BASIC OPERATION 1. Press “TV/AV/DVD” button on the unit or press the TV/DVD direct key on the remote handset to turn on DVD. 2. Press “OPEN / CLOSE (EJECT)” ( ) button to load disc in disc tray. 3.
Page 16
OPERATING YOUR DVD TO ACCESS THE MAIN MENUS: To access the four main menus, perform the following: 1. While in the DVD Stop mode, press the SETUP button to enter the Setup Menu. 2. Press the Navigation ( ) button to select the Main menus ( ), then press the PLAY/ENTER button.
Page 17
OPERATING YOUR DVD QUICK START MENU: Access the Quick Start menu as described on page 14, then select/change the setup option as described on page 15. PLAYER MENU OPTION: Select the PLAYER MENU to choose the desired QUICK SETUP language(English, French , Spanish, German, Italian, PLAYER MENU ENGLISH Portuguese, Nederland).
OPERATING YOUR DVD LANGUAGE SETUP MENU: Select the Language icon using the Navigation ( , ) buttons, press the PLAY/ENTER button and then select/change the setup option as described on page 15. AUDIO LANG Select the language the DVD will be played back in. LANGUAGE The DVD must be recorded in the selected language, AUDIO LANG...
OPERATING YOUR DVD DISPLA Y SETUP MENU: Select the Display icon using the Navigation ( , ) buttons, then select/change the setup option as described on page 15. TV ASPECT 4:3PS: Select when the unit is connected to a con- ventional TV.
DVD BASIC OPERATION IMPORTANT NOTES: • A symbol will appear at the upper right corner on the TV screen during operation if you try to access a function that is not available on the disc. • Some discs may take a few seconds to load. •...
DVD BASIC OPERATION(CONTINUED) SKIP Press the SKIP ( ) button to advance the DVD to the beginning of the next chapter. Press the SKIP ( ) button to move the DVD to the beginning of the previous chapters. SEARCH During playback, press either the SEARCH ( ) button or SEARCH ( ) button to move the DVD forward or backward at double (x2) speed to locate a specific section.
CD BASIC OPERATION PLAYBACK OF A CD 1. Press “TV/AV/DVD” button on the unit or press the TV/DVD direct key on the remote handset to turn ON DVD. 2. Press the OPEN/CLOSE button to open the disc tray. Insert a disc with the label side facing up on the disc tray.
PICTURE CD OPERATION PLAYBACK OF A PICTURE CD Press the “TV/AV/DVD” button on the unit or press the “TV/DVD”direct key on the remote handset to turn DVD. Press the Open/Close button to open the disc tray. Insert a picture CD with the label side facing up on the disc tray.
ABOUT DISCS The region number for this DVD Player is : See the following page for information regarding region numbers. PLAYABLE DISCS: The following discs can be played back on this DVD player: DISC TYPES: Data on most DVDs is divided into sections called “titles” and then into subsections called “chapters”, each of which is given a title or chapter number.
TROUBLESHOOTING Your television is designed to give you trouble-free performance for many years. If you have a problem with your TV, try the solutions listed below. There is no picture or sound, or the TV doesn’ t turn on. • Make sure the TV is plugged in.
CARE & MAINTENANCE This television receiver represents a fine example of electronic engineering and construction. As such it should be treated with care. We offer the following suggestions so you will enjoy this product for the years to come. Keep it dry. If water should get on it, wipe if off immediately.
SPECIFICATIONS TV SECTION Receiving Channels CH 2 - 4 CH 5 - 12 CH 21- 69 Tuner Type 255 Channel , VS TUNING DVD SECTION Laser Wave length 655nm Laser power : Class 1 Signal System PAL/NTSC output Digital audio output Coaxial digital output;...
Need help?
Do you have a question about the PC1320PTVD and is the answer not in the manual?
Questions and answers