Yanmar 6SY Series Operation Manual page 51

Hide thumbs Also See for 6SY Series:
Table of Contents

Advertisement

A
CAUTION
COOLANT HAZARD!
• Wear eye protection and
rubber gloves when you
handle Long Life engine
coolant. If contact with the
eyes or skin should occur,
flush eyes and wash
immediately with clean water.
• Failure to comply may result in
minor or moderate injury.
To Check the Coolant Level:
1. Open the coolant recovery tank fill cap
and check the coolant level.
• The correct level for a cold engine is
approximately 50 mm (2.0 in.) below
the full line.
2. Add coolant as necessary. Do not add
water.
6SY Operation Manual
0000005enMarine
BEFORE YOU OPERATE
CAUTION
COOLANT HAZARD!
When adding large amounts of
coolant, NEVER pour cold
coolant into a hot engine.
The cylinder block and cylinder
head could crack.
CAUTION
• Only use the engine coolant
specified. Other engine
coolants may affect warranty
coverage, cause an internal
buildup of rust and scale
and / or shorten engine life.
• Prevent dirt and debris from
contaminating engine coolant.
Carefully clean the heat
exchanger cap and the
surrounding area before you
remove the cap.
• NEVER mix different types of
engine coolants. This may
adversely affect the properties
of the engine coolant.
00000029
0000006enTrans
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents