Mirror Position; Positioning Belt (Optional); Comfort Adjustments - Pride CELEBRITY XL Owner's Manual

V I I .

MIRROR POSITION

To install the mirror (see figure 18):
1. Determine a side to install the mirror and remove the rub-
ber plug from the top of the tiller handle.
2. Insert the threaded end of the mirror holder into the open-
ing and rotate it clockwise until snug.
3. If necessary, rotate the nut clockwise to secure the mirror
in place.
To adjust the mirror:
1. Position yourself in a seated driving position facing forward.
2. Adjust the mirror left, right, up or down until you have a
good line of sight behind you.

POSITIONING BELT (OPTIONAL)

Your scooter seat may be equipped with an auto-type posi-
tioning belt that can be adjusted for operator comfort. See fig-
ure 19. The positioning belt is designed to help support the
operator so that he/she does not slide down or forward in the
seat. The positioning belt is not designed for use as a restraining
device.
To install the positioning belt (if required):
1. Remove the seat from your scooter.
2. Place the seat upside down so that you can see the bottom
of the seat base.
3. Remove the two bolts on the outermost part of the rear
seat mounting strap.
4. Insert the bolt through the appropriate end of the position-
ing belt and then through the seat mounting strap for each side of the scooter seat.
5. Tighten the bolts.
To adjust the positioning belt for operator comfort:
1. Insert the metal tab on the right side of the belt into the plastic housing on the opposite strap until you hear a
"click."
2. Pull the strap on the right side of the belt until it is secure, but not so tight as to cause discomfort.
MANDATORY! Make sure the positioning belt is properly secured to the scooter and is
adjusted for operator comfort.
MANDATORY! Inspect the positioning belt for loose or damaged parts before each use of
the scooter. If you discover a problem, contact your authorized Pride Provider for
maintenance and repair.
Celebrity XL
C O M F O R T
www.pridemobility.com
A D J U S T M E N T S
MIRROR HOLDER
NUT
Figure 18. Mirror Installation
Figure 19. Positioning Belt
PLUG
35