Front Panel - Mitsubishi Electric Mr.Slim MSZ-FK09VA Operating Instructions Manual

● OPERATING INSTRUCTIONS ●
C
LEANING
Instructions: Instructions:
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
Air fi lter
Clean every 2 weeks
•
• Remove dirt by a vacuum cleaner, or rinse with water.
• After washing with water, dry it well in shade.

Front panel

Hinge
Hole
1. Lift the front panel until a "click" is heard.
2. Hold the hinges and pull to remove as shown in the illustration above.
• Wipe with a soft dry cloth or rinse it with water.
• Do not soak it in water for more than two hours.
• Dry it well in shade.
3. Install the front panel by following the removal
procedure in reverse. Close the front panel se-
curely and press the positions indicated by the
arrows.
En-11
• Use only diluted mild detergents.
• Do not expose parts to direct sunlight, heat, or fi re to dry.
• Do not use water hotter than 50°C.
D.S.PLASMA device
Every 3 months:
• Remove dirt by a vacuum cleaner.
When dirt cannot be removed by vacuum cleaning:
• Soak the fi lter together with its frame in lukewarm water and rinse it.
• After washing, dry it well in shade.
Air cleaning fi lter
(Electrostatic anti-allergy enzyme fi lter,
blue)
Every 3 months:
• Remove dirt by a vacuum cleaner.
When dirt cannot be removed by vacuum cleaning:
• Soak the fi lter and its frame in lukewarm water before rinsing it.
• After washing, dry it well in shade. Install all tabs of the air fi lter.
Every year:
• Replace it with a new air cleaning
fi lter for best performance.
• Parts Number MAC-2330FT-E
• Parts Number MAC-2340FT-E
and
(Deodorizing fi lter, black)
Every 3 months:
• Remove dirt by a vacuum cleaner, or soak the framed fi lter in lukewarm
water (30 to 40°C) for about 15 minutes. Rinse well.
• After washing, dry it well in shade.
• Deodorizing feature recovers by cleaning the fi lter.
When dirt or smell cannot be removed by cleaning:
• Replace it with a new air cleaning fi lter.
• Parts Number MAC-3000FT-E
• Clean the fi lters regularly for best performance and to
reduce power consumption.
• Dirty fi lters cause condensation in the air conditioner
which will contribute to the growth of fungi such as
mold. It is therefore recommended to clean air fi lters
every 2 weeks.
• Do not touch the move eye sensor.
• The D.S.PLASMA device does not function for safety for
a couple minutes after the operation starts or the front
panel is opened/closed.
• Do not disassemble the D.S.PLASMA device.
• Do not touch any parts other than the frame of the
D.S.PLASMA device.
(with frame)
(no frame)
Pull to remove from the air fi lter
Important