Setting Up The Viewer; Charging The Battery - Epson Multimedia Storage Viewer P-6000 Basic Operation Manual

Setting Up the Viewer

Charging the battery

1. Open the battery cover.
2. Insert the battery into the compartment in the
direction of the arrow on the battery sticker.
Insert the battery until it
clicks and locks in place.
3. Close the battery cover and slide it to the left until it
clicks.
4. Connect the AC adapter, then plug the other end
into a power outlet.
The Charge lamp lights green during charging. It takes
about 3.5 hours to fully charge the battery when the
power is off.
Charge lamp
7
Getting Started
1
1
1
1
1
1
1
1
1
1