Download Print this page

Ideal Air 700485 Installation & Operation Manual

Ideal air mini-split 13 seer air conditioner

Advertisement

Quick Links

MINI-SPLIT 13 SEER AIR CONDITIONER
MODEL: 700485
700490
700495
INSTALLATION VIDEO AVAILABLE ON www.ideal-air.com

Advertisement

loading

Summary of Contents for Ideal Air 700485

  • Page 1 MINI-SPLIT 13 SEER AIR CONDITIONER MODEL: 700485 700490 700495 INSTALLATION VIDEO AVAILABLE ON www.ideal-air.com...
  • Page 2 vide snow vents. When Connecting Refrigerant Tubing Tighten the nut with a torque wrench for a leak free connection. Open the stop valves all the way and leave open. Check for leaks with soapy water at all refrigerant line connections. NOTE: Depending on the system t...
  • Page 3 Serrer l'écrou avec une clé dynamométrique pour une connexion sans fuite. Ouvrir les vannes d'arrêt tout le chemin et laisser ouverte. Vérifiez pour les les fuites avec la l 'eau savonneuse à tous les connexions de ligne de de fluide frigorigène.
  • Page 4 T o o l n am e C o n t e n t s o f c h a n g e Pr e s s u r e is h ig h an d c an n o t b e m e a s u re d w it h a c o n v en t io n a l ga u g e. T o p r e v e nt er r o ne o u s m ix in g o f ot he r r e fr ig er a n ts , th e d ia m et er of e a c h p o rt h a s b e en c ha n g ed .I t G a u g e m a n if o ld is r e c o m m en d e d th e g au g e w ith s ea ls - 0 .1 t o 5.
  • Page 5 e system before beginning. Table 4 Installation Accessories Nam e Q’ty Cooling/Dry Mode Heating Mode For indoor unit Wall hook bracket Outdoor temperature 0C(32F)~46C(115F) -23C(-10F)~23C(75F) installation Indoor temperature 16C(60F)~30C(90F) 10C(50F)~30C(90F) Use for air conditioner Rem ote controller operation Indoor humidity Battery For rem ote control unit For indoor unit...
  • Page 7 120V,60HZ...
  • Page 10 Important: Before pushing down handle, verify fittings are properly aligned. If improperly aligned, damage to O’rings will occur allowing refrigerant leakage.
  • Page 11 Remove the waterproofing covers on the outdoor unit quick connectors. Inspect both quick connectors on outdoor unit and lineset for debri, clean if necessary. If debri is allowed to enter system, damage may occur. Connect the quick connect fittings to the outdoor unit valves with 2 wrenches. DO NOT OVER TIGHTEN, DAMAGE &...
  • Page 12 1. Start the A/C, operate in Cooling mode. 2. Remove the cap of the two valves with a wrench. 5. Disconnect the power cable from outdoor unit. 6. Loose the nut of the quick connect pipe from the outdoor unit valve with 2 wrenches INSURE NO DEBRI ENTERS THE QUICK CONNECTS.
  • Page 13 BLUE AC- N R Y B/O...
  • Page 14 CN10 C0N9...
  • Page 15 CN12 W G R Y CN6-UP CN7-R CN8-L CN10 OUTPUT...
  • Page 16 120v/60hz power 12kbtu 230v/60hz power 24kbtu 36kbtu (3 ) A lw a y s f a s te n th e o u ts id e c o v e r ing o f th e (1 ) M a tc h th e te r m in al blo c k n um b e r s a n d c o nn e c t io n c o r d w ith t h e c o rd c lam p.
  • Page 17 120V/60HZ 230V/60HZ 12KBTU 24KBTU/36KBTU Be sure to comply with local codes while running the wire from the indoor unit to the outdoor unit (size of wire and wiring method, etc. ). Every wire must be connected firmly. No wire should be allowed to touch refrigerant tubing, the compressor or any moving part.
  • Page 21 9-core signal wires Remote controller filter Air intake grill Carbon filter Photo catalyzer filter Front cover louver Drain hose Power cable with plug Step motor Air deflector assembly Liquid quick connector Gas quick connector evaporator Motor bearing right Motor buffer right Blower motor Motor bearing left Motor buffer left...
  • Page 22 Condenser Fan motor capacitor Compressor jacket Compressor Outdoor fan motor Motor bracket...
  • Page 24: Cool Operation

    COOL Operation at COOL mode, unit will run in COOL mode.
  • Page 32 ower is completely off Before requesting s Sym ptom Problem Reason If the unit is stopped and then immediately started again, the com pressor w ill not operate for about 3 minutes, in order to prevent Doesn’t operate fuse blow outs. immediately: Whenever the Pow er Supply Plug is disconnected and then re- connected to a pow er outlet, the protection circuit w ill operate for...
  • Page 33: Error Code

    ERROR CODE ERROR CODE PROBLEM INDOOR UNIT AMBIENT TEMPERATURE SENSOR PROBLEM INDOOR UNIT FAN COIL TEMPERATURE SENSOR PROBLEM COOLING PERFORMANCE PROBLEM ANTI-FREEZING in COOLING INDOOR UNIT FAN MOTOR PROBLEM WIRING FOR AUXILIARY THERMOSTAT Indoor Unit Yellow White cable connector connector Thermostat White Black...

This manual is also suitable for:

700495700490