System Settings - Net1 R-90 User Manual

R-90 Series

4.4 System Settings

From the system settings page you can perform a variety of administration tasks.
Set Password – From here you can change the password, which is used to access the web GUI
Set Username – This option allows you to modify the user name, which is used to access the web GUI
Management Interface Protocol – This option allows you to toggle between using a HTTP or HTTPS
connection when using the web GUI. If you do change to using a HTTPS connection please ensure that
you add in HTTPS in the address field of your browser
Restore Settings – This option will restore the unit to factory settings. Any modifications that you may
have mad to SSID, WPA password, Port Forwarding etc will be lost. The login will revert back to the
default settings.
Router Upgrade – Occasionally your operator may release a new router firmware for your R-90, and this
new firmware can be applied using this option
CDMA Upgrade – Occasionally your operator may release a new CDMA firmware for your R-90, and this
new firmware can be applied using this option. (This is a low level firmware in addition to the router
firmware above.) The CDMA firmware can be identified as the file name will start with 'V6H'
Reboot Settings – Occasionally you may need to reboot your device and this can be done by using this
option.
18