Connecting And Configuring Your Router - Net1 R-90 User Manual

R-90 Series

3.11 Connecting and Configuring your Router

Each router is factory built for use with a particular service provider. Thus, each router is set to use particular
radio channels and to enable services specific to a provider.
Once your router has been activated with the network, connect your computer to the router using the
provided Ethernet (RJ-45) cable or Wi-Fi. You are now ready to use the Internet.
3.11.1 Connecting with Wi-Fi
When connecting through Wi-Fi please ensure you try to connect to the correct R-90 as each device has a
unique SSID. The SSID can be found on the sticker, which is located on the bottom of the router. Please
note that the last 4 characters are random.
You will also need to enter the unique password for your router. This again can be found on the sticker on
the bottom of your router
*Please note that the last 4 characters of the SSID is a random combination of both letters and numbers and
will differ from the SSID that is shown on your device label
10