Table of Contents
Advertisement
Chapter 4 Dictionary Program
Dictionary program translate English to Chinese. Using Super ScanEYE to scan English
document directly and translate it instantly to Chinese.
4.1 Scanning Techniques
Penpower Super ScanEYE can be used to scan many kinds of character. The size must be
between 6 and 22 biggest font 8mm). It can scan in any words with different background
colours except 'red words with white background' or vice versa and also' blue words with
black background' and vice versa.
1. Take off the protection cap, then press
2. Select "Scan and Translate" from the menu. Press
Now" message, and the scanner is ready for scanning. As the red light at the scanner
head is blinking, this indicates that scanning can begin. Press
Press the left-right direction button to select Traditional Chinese to English dictionary
or English to Traditional Chinese dictionary. Under the English to Traditional Chinese
dictionary mode, the English words can be scanned and translated into Chinese
readily. Under the Traditional Chinese to English dictionary mode, the Traditional
Chinese words can be scanned and translated into English readily.
Attention: The red light should be blinking during scanning. Otherwise, please power
off the scanner and power on again.
3. Left-hand/Right-hand Setting: If you are using your left hand to operate the scanner,
please set to left-hand usage in the setting. Please refer to Chapter 3, Section 3.3.
4. Scanning Direction Setting: Default setting is auto-detection. Users can follow the
words direction and do a vertical or horizontal scanning, so as to increase the scanning
recognition speed. Please to Chapter 5 Section 5.5.
Chapter 4 Dictionary Program
to power on.
when the screen shows "Scan
for options.
4-1
Advertisement
Table of Contents
