Volvo XC 90 Owner's Manual page 284

DRIVER SUPPORT
||
Reactivating SL from standby mode
To reactivate SL after it has temporarily been put
in standby mode:
–
Press the button (1).
> The maximum speed marker (4) and sym-
bols will change colors from GRAY to
WHITE and the vehicle's maximum speed
will be limited to the previously set maxi-
3
mum speed .
or
–
Press the button (2).
> The maximum speed marker (4) and sym-
bols will change colors from GRAY to
WHITE and the vehicle's current speed
will be set as the maximum speed.
2 This also applies to the Automatic Speed limiter (ASL).
When reactivating ASL, the vehicle's maximum speed will be limited to the previously set maximum speed unless the vehicle passed a sign with a higher or lower speed limit while ASL was in standby mode.
3
282
Related information
2
•
Speed limiter (SL)* (p. 276)
•
Starting and activating the Speed Limiter
(SL)* (p. 277)
Turning the Speed Limiter* off
The Speed Limiter (SL) can be turned off.
Function buttons and symbols
1. Press the
button (2).
> SL will go into standby mode.
2. Press the ◀ (1) or ▶ (3) buttons to change to
another function.
> The SL symbol (4) in the instrument panel
will go out.
3. Press the
button (2) again.
> Another function will be activated. The set
maximum speed will be erased from the
system's memory.
* Option/accessory, for more information, see Introduction.