Fujitsu fi-60F Operator's Manual page 25

5) Select the profile for scanning.
•
When creating a new profile
Select one from existing profiles and click [Add...] button.
•
When changing the settings of already existing profiles
Select one from existing profiles and click [Edit...] button.
•
When using an existing profile
Select one from an existing profiles.
6) Open the window of ISIS Driver.
Select the [Scan] tab and click the [Scanner Settings...] on the [Scan Profile Editor]
window.
⇒ The configuration window of ISIS driver appears.
12
⇒ A new profile will be created based on the profile you select.
⇒ The settings of the selected profile can be changed.
⇒ Scanning will be started according to the settings of the selected profile.
Go to procedure 9.