Indicator
Name
Turn Signal and
Hazard Warning
Indicators
High Beam
Indicator
Lights On
Indicator
Fog Light
Indicator
Immobilizer
System Indicator
On/Blinking
Blinks when you operate the turn
●
signal lever.
Blink if you press the hazard warning
●
button.
Comes on when the high beam
●
headlights are on.
Comes on whenever the light switch
●
is on, or in AUTO when the exterior
lights are on.
Comes on when the fog lights are
●
on.
Comes on briefly when you set the
●
power mode to ON, then goes off.
Comes on if the immobilizer system
●
cannot recognize the key
information.
Explanation
Does not blink or blinks rapidly - A turn
●
signal light bulb has blown. Change the
bulb immediately.
2 Replacing Light Bulbs P. 484, 485, 486
—
If you set the power mode to ACCESSORY
●
or VEHICLE OFF (LOCK) while the exterior
lights are on, a chime sounds when the
driver's door is opened.
—
Blinks - You cannot start the power system.
●
Set the power mode to VEHICLE OFF
(LOCK), then select the ON mode again.
Repeatedly blinks - The system may be
●
malfunctioning. Have your vehicle checked
by a dealer.
Do not attempt to alter this system or add
●
other devices to it. Electrical problems can
occur.
uuIndicatorsu
Message
—
—
—
—
—
Continued
85