Honda Acura RLX Hybrid 2016 Owner's Manual page 84

Indicator Name
High
Temperature
Indicator
Low Temperature
Indicator
Vehicle Stability
Assist (VSA®)
System Indicator
Vehicle Stability
Assist (VSA®) OFF
Indicator
On/Blinking
Comes on for a few seconds when
●
you set the power mode to ON, then
goes off.
Blinks when the engine coolant
●
temperature goes up, and stays on if
the temperature continues to rise.
Comes on for a few seconds when
●
you set the power mode to ON, then
goes off.
Comes on when the engine coolant
●
temperature is low.
Comes on for a few seconds when
●
you set the power mode to ON, then
goes off.
Blinks when VSA® is active.
●
Comes on if there is a problem with
●
the VSA® system.
Comes on for a few seconds when
●
you set the power mode to ON, then
goes off.
Comes on when you deactivate
●
VSA®.
Explanation
Blinks while driving - Drive slowly to
●
prevent overheating.
Stays on while driving - Immediately stop
●
in a safe place and allow the engine to cool.
2 Overheating P. 537
If the indicator stays on after the engine has
●
reached normal operating temperature,
there may be problem with the temperature
sensors. Have your vehicle inspected by a
dealer.
Stays on constantly - Have your vehicle
●
checked by a dealer.
2 Vehicle Stability Assist (VSA®), aka
Electronic Stability Control (ESC),
System P. 412
2 VSA® OFF Button P. 413
uuIndicatorsu
Message
—
—
Continued 83