Honda Acura RLX Hybrid 2016 Owner's Manual page 171

uuOperating the Switches Around the Steering WheeluDriving Position Memory System
■
Storing a Position in Memory
Memory Button 1
Memory Button 2
SET Button
■
Recalling the Stored Position
Memory Buttons
170
1. Set the power mode to ON. Adjust the
driver's seat, the steering wheel and the
door mirrors to the desired position.
2. Press the SET button.
u You will hear the beep, and the memory
button indicator light will blink.
3. Press memory button ( 1 or
seconds of pressing the SET button.
u Once the seat, the steering wheel and
the outside mirror positions have been
memorized, the indicator light on the
button you pressed stays on.
1. Change to ( P .
2. Apply the parking brake.
3. Press a memory button ( 1 or (
u You will hear the beep, and the indicator
light will blink.
The seat, the steering wheel and the door
mirrors will automatically move to the
memorized positions. When it has finished
moving, you will hear the beep, and the
indicator light stays on.
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat, the steering wheel or the
outside mirror position before the double-beep.
•
You set the power mode to any position except
ON.
( 2 within five
1Recalling the Stored Position
The seat will stop moving if you:
•
Press the SET button, or a memory button (
).
( 2
( 2 ).
•
Adjust the seat, the steering wheel or the door
mirror position.
•
Shift into any position except
or
1 (
.
( P