■
When the system detects a vehicle
BSI Alert Indicator: Located near the outside
rearview mirror on both sides.
Comes on when:
A vehicle enters the alert zone from behind
●
to overtake you with a speed difference of
no more than 31 mph (50 km/h) from your
vehicle.
You pass a vehicle with a speed difference
●
of no more than 12 mph (20 km/h).
Blinks and a beeper sounds when:
You move the turn signal lever in the direction
of the detected vehicle. The beeper sounds
three times.
uuWhen DrivinguBlind Spot Information (BSI) System
1Blind Spot Information (BSI) System
•
An object not detected by the radar sensors
Comes On
approaches or passes your vehicle.
•
A vehicle running in the adjacent lane is a
motorcycle or other small vehicle.
The system does not operate when in
Blinks
You can change the setting for BSI.
2 Customized Features P. 113, 286
BSI may be adversely affected when:
•
Objects (guard rails, poles, trees, etc,.) are
detected.
•
An object that does not reflect radio waves well,
such as a motorcycle, is in the alert zone.
•
Driving on a curved road.
•
A vehicle is moving from a far lane to the adjacent
lane.
•
The system picks up external electrical interference.
•
The rear bumper or the sensors have been improperly
repaired or the rear bumper has been deformed.
•
The orientation of the sensors has been changed.
•
In bad weather (Heavy rain, snow, and fog).
For proper BSI operation:
•
Always keep the rear bumper corner area clean.
•
Do not cover the rear bumper corner area with
labels or stickers of any kind.
•
Take your vehicle to a dealer if you need the rear
bumper corner area or the radar sensors to be repaired,
or the rear bumper corner area is strongly impacted.
(
R
.
417