Installation; Connections; Firmware & Drivers - Gemini MDJ-1000 Operation Manual

INSTALLATION

Connections

Connect each MDJ-1000 with a USB
port of your computer using the
provided USB cable.
Use a pair of RCA cables to connect
each MDJ-1000 Line Output with an
Input Channel of a mixer. Any
analogue or digital mixer can be used.
Connect your amplifier or amplified
speakers to the Master Output of a
mixer
Use the provided AC/DC power
adaptors and power on each MDJ-
1000 your mixer and your amplifier.
Set the MDJ-1000 to MIDI mode
using the MIDI Source Select button
(M).
Firmware & Drivers
Firmware
Update the firmware of the unit to the latest version, following instructions provided at:
http://geminisound.com/product/mdj-1000
Drivers
Windows: Download and install the latest ASIO drivers from
http://geminisound.com/product/mdj-1000
Mac OSX. No drivers are necessary to install for Mac computers. The Operating system will
use its own audio drivers when the unit is connected to the USB port.
(Downloads tab)
(Downloads tab)
VirtualDJ 8 – Gemini MDJ-1000
3