Table of Contents
Advertisement
CONTROLLER LAYOUT
Rear Panel Description
2
3
1
10
11
12
Infrared Control Outputs. Used to
control connected devices with IR
1.
IR1 / IR2
control inputs.
USB Ports for connection of Tablet
Monitor touch functionality. Used to
Tablet Monitor
switch between the operating
2.
USB Ports
computer and devices connected to
the Notebook Interface.
Sensor for integration of heating and
3.
SENSOR
cooling systems.
Composite AV Output
4.
AV Out
Component and Composite video
5.
AV IN1 / AV IN2
inputs.
RS-232 control for system projector.
6.
PROJECTOR
RS-232 connection for controller
interface (7"LCD touch pad or 25 key
7.
KEYPAD
pad)
VGA video output for operating
8.
MONITOR OUT
computer monitor.
VGA input for operating computer.
9.
PC IN
4
5
13
IR1 – Output for IR control of connected device.
IR2 – Additional output for IR control of connected device.
TABLET – Connect to your Tablet Monitor's USB for Touch port.
PC – Connect to an available USB port on your computer.
NOTE – Connect to the USB port on Podium's Notebook Interface.
SENSOR – Use to connect to heating and cooling system thermostats. Control
temperature levels in facilities where integration is possible.
AV OUT – AV Output through composite connection:
Video Specifications :
Audio Specifications :
AV IN 1 – Component video input.
AV IN 2 – Composite video input.
Connect PROJECTOR to the RS-232 input of your projector to control its functions.
Connect KEYPAD to the RS-232 input on the 7" LCD pad or the 25 Key pad to
operate the controller. This port is also used for conducting firmware upgrades.
Connect MONITOR OUT to your computer or podium's monitor using a VGA cable.
Video Specifications :
Connect PC IN to your operating computer. This will output your computer's
screen to the connected video device (projector, display, etc) and podium monitor.
www.barosnt.com
6
7
14
15
16
8
9
17
18
4
Advertisement
Table of Contents
