Table of Contents
Advertisement
INFRARED SIGNAL PROGRAMMING
***By default the BRC-4000 controller is formatted to operate projector power (ON/OFF), input selection,
and mute functions only. If you would like to control another device such as an interactive display or dvd
player, the controller will require an update so that the proper functions and interface can be utilized in
the 7" touch pad. For example, brightness, contrast, channel selection and other functions would need to
have icons custom programmed for control of a television or display. For IR programming of devices
other than projectors, contact your Baro representative to receive a customized controller interface.
For projectors and all other devices, the following process is used. The following example describes
programming a projector:
1.
With the controller on, enter "Projector & Motor" as found on the main home screen.
2.
Press "IR Input" in the bottom left of "Projector & Motor" screen.
www.barosnt.com
20
Advertisement
Table of Contents
