Advertisement
3.
Press the SPEED button once more. The LOW speed indicator will turn on
and the unit will operate on the lowest setting.
SWING Button
1.
Press the SWING button. At this time, the indicators will turn on and the
louvers will swing (covers 60 degrees horizontally).
2.
Press the SWING button again to stop the unit at a desired position. The
indicator will turn off at this time.
TIMER Button
1.
Press the TIMER button to set the timer. Every press will add another 30
minutes of operating time with a maximum of 7.5 hours. The programmed
time will be indicated on the display.
2.
To stop the timer, press the TIMER button a total of 16 times (one more
press after reaching 7.5 hours). The TIMER indicator will turn off.
COOL Button
1.
Press the COOL button. If the tank is filled to a sufficient level, the COOL
indicator will turn on and the pump will begin to work.
2.
After about 3 minutes, the unit will provide cool, humidified air.
3.
Press the COOL button again to shut off the pump. The COOL indicator will
turn off, and the unit will produce fresh, dry air.
Please Note:
1.
If the COOL button is pressed when there is insufficient water in the tank,
an alarm will sound after 90 seconds. The COOL indicator will continue to
flash for 10 seconds. After 10 seconds, the alarm will stop and the COOL
indicator will also turn off.
2.
The unit can also be used without water. In this case, it will operate as a
normal electric fan. If this is desired, make sure the COOL button is in OFF
mode.
10
http://www.NewAir.com
Hide quick links:
Advertisement
