SoftBank 101P User Manual And Assembly Instructions page 17

Using Desktop Holder
Connecting Desktop Holder to a computer via Micro USB Cable
will not charge battery.
Connect Micro USB Cable to Desktop Holder port
・ Insert Micro USB plug (
up) into Desktop Holder port.
Connect Micro USB Cable to AC Adapter
・ Insert USB plug (
up) into connection port as shown.
Plug in AC Adapter
・ Extend AC Adapter blades (
Attach Handset to Desktop Holder
Notification Lamp illuminates while charging. Notification
Lamp goes out when battery is full.
・ Place handset onto Desktop Holder
guides ; press down unit it clicks in place
・Confirm handset orientation; fit it snugly onto Desktop
Holder. Do not let strap, etc. get caught between handset
and Desktop Holder.
When battery is completely charged, remove Handset from
Desktop Holder
・Stabilize Desktop Holder and tilt handset forward to remove
it.
).
; align handset with
.
Charging Cautions
Handset may warm when charging. If overheat indicator
( ) appears; disabled functions appear in Notifications
panel.
15