SoftBank 101P User Manual And Assembly Instructions page 12

10
Close Battery Cover
・ Fit Battery Cover tabs
Cover ; press firmly
・Press down firmly here ● to secure Cover.
into handset slots to replace
to seal.
Removing SD Card
Always perform Unmount SD Card, then power off first.
Remove Battery Cover
・ Use notch (
) to lift and remove Battery Cover.
・Secure Battery Cover to maintain waterproofing. Forcibly
opening Cover may cause injury.
Remove battery
・ Use tab (
) to lift battery.
Remove SD Card
・SD Card pops out with a light push.
Insert battery
・ With arrows up
, slide battery tabs into handset slots
, pressing in and down
・Keep battery tabs away from charging terminals.
.