OPERATION 2. CONTROLS 3. SANDING The tool is recommended for use with a residual current 1. Turn multi function tool 2. Place the multi function tool device with a rated residual current of 30mA or less. on and select appropriate flat on the workpiece.
Page 4
Grout Removal Disc 1. Turn the multi function tool on and select speed. 2. Use slight pendulum motion when cutting. Note: Periodicaly turn the unit off and remove any built-up dust and debris. MFQ-3100...
Carbon brushes (pair) SPMFQ3100-40 Note: Ozito Industries will not be responsible for any damage or injuries Sanding Pad SPMFQ3100-508 caused by the repair of the multi function tool by an unauthorised person or by mishandling of the multi function tool.
Page 6
Tool: Quick Change Multi Function Tool SPARE PARTS Model No. MFQ-3100 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. Flange...
Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. Using an Extension Lead Always use an approved extension lead suitable for the power input of this tool.
• Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0913...
Need help?
Do you have a question about the MFQ-3100 and is the answer not in the manual?
Questions and answers