Displaying The Flicker Detection - Canon EOS REBEL T6S Instruction Manual

Displaying the Flicker DetectionK
If you set this function, <G> will appear in the viewfinder when
the camera detects flicker caused by the blinking of the light source. By
default, flicker detection is set to [Show].
If you set [z3: Anti-flicker shoot.] to [Enable], you can shoot with
reduced unevenness of exposure caused by the flicker (p.154).
72
Select [Viewfinder display].
1
Under the [52] tab, select

[Viewfinder display], then press
<0>.
Select [Flicker detection].
2
Select [Flicker detection], then

press <0>.
Select [Show].
3
Select [Show], then press <0>.
