Enabling Live View Shooting - Canon EOS REBEL T6S Instruction Manual

Enabling Live View Shooting

Number of Possible Shots with Live View Shooting (Approx. number of shots)
Temperature
No Flash
50% Flash Use
The figures above are based on a fully-charged Battery Pack LP-E17 and CIPA

(Camera & Imaging Products Association) testing standards.
With a fully-charged Battery Pack LP-E17, continuous Live View shooting is

possible for approx. 1 hr. 30 min. at room temperature (23°C / 73°F).
In the <x> mode, Live View shooting is not possible.

In the <F> and <G> modes, the shooting range will be smaller.

When the flash is recycling, "BUSY" is displayed on the LCD monitor,

and you cannot view the subject.
Do not point the camera toward an intense light source, such as the sun

or an intense artificial light source. Doing so may damage the image
sensor or the camera's internal components.
General Live View Shooting Cautions are on pages 230-231.

When flash is used, there will be two shutter sounds, but only one shot will

be taken. Also, the time it takes to capture an image after you press the
shutter button completely will be slightly longer than with viewfinder shooting.
If the camera is not operated for a prolonged period, the power will turn

off automatically after the time set in [52: Auto power off] (p.273). If
[52: Auto power off] is set to [Disable], Live View shooting will end
automatically after 30 min. (camera power remains on).
With the HDMI cable HTC-100 (sold separately) or stereo AV cable AVC-

DC400ST (sold separately), you can display the Live View image on a
TV set (p.312, 315).
Set [A: Live View shoot.] to [Enable].
Room Temperature
(23°C / 73°F)
200
180
A Shooting with the LCD Monitor
Low Temperatures
(0°C / 32°F)
170
150
203