Manual Programming Of The Sip Trunk Lines - Eircom Advantage 2000 System Manual

Advantage 2000 System Manual
3.4.

Manual Programming of the SIP trunk lines

The VoIP trunk lines of the Advantage 2000 may be configured automatically by the
network operator. However, should you need to programme the trunks manually, you
can do so by clicking the link 'SIP Accounts' under the heading SIP Trunks. The
following page will be displayed:
This page is used to display the status and parameters of the SIP external lines,
which connect to the Voice over IP public network. Each telephone number
corresponds to an account on the public VoIP network. Each account has a user
name and password. These details are provided by the operator of the network.
The parameters of the SIP accounts are displayed here. Press the 'edit' button to
configure. The following parameters are displayed.
NAME: The Advantage 2000 may allocate a name to each SIP account.
USERNAME: This is the username defined by the network operator for this SIP
account.
PROVIDER: This is location of the SIP server as defined by the network operator.
Typically it is in the format sip.operator.com.
Page 20