Table of Contents
Advertisement
Advantage 24000 System Manual
3.4. Manual Programming of the SIP trunk lines
The VoIP trunk lines of the Advantage 24000 may be configured automatically by the network
Operator. However, should you need to programme the trunks manually, you can do so by
clicking the link 'SIP Accounts' under the heading SIP Trunks. The following page will be
displayed:
This page is used to display the status and parameters of the SIP external lines, which connect
to the Voice over IP public network. Each telephone number corresponds to an account on the
public VoIP network. Each account has a user name and password. These details are
provided by the Operator of the network.
The parameters of the SIP accounts are displayed here. Press the 'edit' button to configure. The
following parameters are displayed.
NAME: The Advantage 24000 may allocate a name to each SIP account.
USERNAME: This is the username defined by the network Operator for this SIP account.
PROVIDER: This is location of the SIP server as defined by the network Operator. Typically it is
in the format sip.Operator.com.
TRUNK ACCESS: This is the line access code for this trunk. The user on an outgoing call may
select this particular trunk by dialling the line access code prior to dialling the external number.
Page 23
Advertisement
Table of Contents
