Panasonic WV-CP630 Installation Manual page 17

e Engage the safety wires with the wire engaging holes respectively.
Wire engaging hole
Pass the ring part of the safety wire
through the wire engaging hole.
For mounting on wall
q Put the tripod mount base on the bottom of the camera.
Secure the safety wire lug for wall (accessory) to the camera mount screw hole with the wire lug
fixing screw (accessory).
Important:
• Be sure to use the provided fixing screws
for the safety wire lug and the removed
screws for the camera mount base.
When using different length screws, it may
damage the camera or cause the camera
to fall.
(Recommended tightening torque: 0.39 N·m)
w Engage the safety wire (accessory) with the wire engaging hole.
Safety wire (accessory)
Wire engaging hole
q Pass the ring part of the safety wire
through the wire engaging hole.
Safety wire
(accessory)
Wire engaging
hole
Fixing screw
hole
Tripod mount base
w Pass the other end of the safety wire
through the ring part of the safety wire.
Wire lug fixing
screw (accessory)
Safety wire lug
for wall
(accessory)
* Leave these holes
untouched.
Mounting screws
17