Canon PowerShot S3 IS User Manual page 53

Ii¥l •
Information for images shot on other cameras may not display
LjI
correctly.
• Overexposure Warning
In the following cases, overexposed portions of the image
blink.
- When reviewing an image right after shooting in the LCD
monitor (information view) or in the viewfinder (information
view)
- When using the detailed display mode of the Playback mode
Power Saving Function
This camera is equipped with a power saving function.
The power will shut off in the following circumstances. Press the
power button again to restore power.
Shooting Mode Powers down approximately 3 minutes after the last control is
input on the camera. [Display Off] activates and the LCD (or
viewfinder) automatically turns off 1 minute
*
after the last
control is input, even if [Auto Power Down] is set to [Off]. (To
turn the LCD monitor back on, press any button other than the
OFF button, or change the vertical or horizontal orientation.)
Playback Mode or Powers down approximately 5 minutes after the last control is
Connected to a Printer input on the camera.
* Default setting (time can be changed).
Ii¥l •
Please note that when the power is turned off with the power
LjI
saving function, small amounts of power are still consumed.
• The power saving function does not activate during automatic
slide show playback or while the camera is connected to a
computer.
• The power saving function settings can be changed (p. 31).
II
D:J
(I)
0'
a
c:
en
S·
(Q
,...
::T
(I)
o
Q)
3
(I)
Si J
23