Canon PowerShot S3 IS User Manual page 51

*1 Appears even if the LCD monitor is set to display no information.
*2 Appears when selected in [Custom Display] (p. 17).
*3 This is not normally displayed. It appears when remaining available internal
memory (buffer) is half or less during movie recording.
When the buffer warning indicates full, shooting or recording may be stopped.
*4 "0" appears in red when no more recording space is available for either still
images at the current number of recordable images, or movies. When both
recording capacities are full, the "Memory card full" message appears.
Ii¥I •
Even in the no information display mode, shooting information
L..iJ
appears for approximately 6 seconds when changing
shooting settings. (Shooting information may not appear
depending on the camera settings at that time.)
• The "Raise the flash" message,
fl
(camera shake warning),
or
@
(flash warning) icon appears in red on the LCD monitor
(or viewfinder) in low light conditions while the camera is
preparing to shoot. Use one of the following shooting
methods.
- Turn the Image Stabilizer function on (p. 39)
- Raise the ISO speed
- Raise the flash to enable automatic or normal firing
- Fix the camera to a tripod
Playback Mode
Standard
~~.II
Compression (Still image) (p. 36)
L M1 M2 S 00
Recording Pixels (Still image) (p. 36)
AVI
Movie (p. 46)
Shooting Date/Time
Total number of images
Displayed image number
II
o
"C
(I)
DJ
..
o·
~
tn
21